Disclaimer: We are using Amazon affiliate Product Advertising API to fetch products from amazon, include: price, content, image, logo, brand, feature of products which are trademarks of Amazon.com. So, when you buy through links on our site, we may earn an affiliate commission. Read more.
Top 10 Best Products
Feature of Products
TAC-SKY Tactical Headset Comta II Helmet Version Noise Reduction Sound Pick Up for Airsoft Activities (Coyote Brown)
- Gel Ear Pads - The earmuffs cushions are made of silicone, 0.3MM TPU cover, more softer and gel kit increases the time you can wear your tactical headphones without discomfort.
- Helmet Version & Comfort - Helmet style headphone, with arc rail adapter, can be installed on your helmet directly which will reduce many steps if you want remodel your headband headset. You can remove the muffs and place them out of the way of your ears when you don’t need hearing protection which can make your ear have more comfort and relax.
- Materials - The plug cable is made of kevla wire and TEP cover with tensile, strong and antifreeze, not easy to be aged and hard. Give a surpurise for your boyfriends,family members or teamates.
- Chip Protection - The chip of tactical headset for helmet is well protected by a film layer, which will bring higher defense capability and is mildew proof, dust proof and moisture proof. The equipped ptt is kenwood plug.
- Noise Reduction - With the electronic active noise reduction and pickup technology, this airsoft earmuffs can provide more clear and natural sound.Attention:Pls press + and - button at the same time to turn on headset(Not press the + or - button and hold for at least 3 seconds).
TAC-SKY Comtac III Helmet Tactical headset,Side Rail Airsoft Earmuffs with PTT and Microphone for Hunting (Army Green)
- Gel Ear Cups - The earmuffs are made of silicone, 0.3MM TPU cover ,more softer and gel kit increases the time you can wear your tactical headphones without discomfort.
- Helmet Style - Different from classic airsoft headset，Helmet style headphone can be installed on your helmet directly which will reduce many steps if you want remodel your headband headset.
- High Strength Materials - The plug cable is made of kevla wire and TEP cover, which is tensile, strong and antifreeze, not easy to be aged and hard. Give a surpurise for your boyfriends,family members or teamates.
- Chip Protection - The chip of COMTA III headset is well protected by a film layer, which will bring higher defense capability and is mildew proof, dust proof and moisture proof.
- Interchangeable Mic - With the electronic active noise reduction and pickup technology, this airsoft earmuffs can provide more clear and natural sound. And the left and right microphones can be interchanged, so they are very convenient to use according to your habits.
ATAIRSOFT Tactical Headset war Unlimited Power intercom with Microphone Waterproof Headphones, no Noise Reduction Function (BK)
- Multi-Usage: Expansion Activities, Tactical Games, Film and Television Props, Team Activities, Cosplay and Other Outdoor Sports.
- Use Headset by Hang On the Helmet // Detachable microphone Free to Install
- No need to install battery, battery Slot and Buttons is For Decoration (Useless).
- New Design Ear Cup Provide Clear Voice and Comfortable Support.
- Please Note: This Version Only has Communication Function, No Noise Reduction Function // This Product Cannot be Used Alone and Needs To be Used with PTT.
TAC-SKY ARC Rail Adapter Helmet Headset Left & Right Side Attachments for Comta Headphones (Black)
- Suitable for peltor C1 ,C2, C3, etc headsets,hang your headsets on helmet instead of headband and release your head,makes regular wear of the pelters so much more comfortable,no sense of restraint any more.
- Rail Adapter can be used on full range of FAST helmets, ACH helmets, MICH helmets,etc who have ARC rails on side.
- Before hanging on headset, lift up adapters with "pa" voice, secendly sliding into the arc rail from front or back, and then slide it on the upper part of the rail for a better fit on muffs to ear,adapter can be rorated 360°.You can adjust tension with a Phillips screwdriver.
- Lastly you can remove the muffs and place them out of the way of your ears when you don’t need hearing protection. Arc rail adapter doesn’t seem like their going to snap so far and they fit well and makes it way more comfortable then wearing the earmuffs with head band inside the helmet.
- Making the part with the plastic hoop goes up and the little plastic notch goes down to adjust length.The most length is 6.6inch which would meet people requirement.
Hearing Protection Ear Muffs Noise-Shooting Ear Protection Ear Protection-Helmet-Type No-Noise Noise-Reduction Tactical Headset -Game Headphone
- Power Supply Mode: Two 7-cell batteries are required. Generally more than five hours.
- Wide Application: Clear sound.This headset is suitable for design training, team activities, games, etc.
- Removable Design: Microphone is detachable. Can be installed freely according to your preference.
- Comfortable Material: Made of soundproof cotton and ABS (seismic fiber added). Comfortable and skin-friendly. Wearing it for a long time will not be stressful.
- Easy to Use: Simple and easy-to-use buttons for quick adjustments. Game headphones.
Generic Peltor Comtac I/II ARC Adapter/Tactical Helmet Rail Suspension Headset Support
- This tactical ARC suspension headset support bracket for Peltor Comtac can match with full range of FAST helmets, ACH helmet, MICH helmet as long as they have arc rails on side.
- By testing, Comtac I and Comtac II headset can be connected to the full range of FAST helmet with this headset adapter.
- With the hanging after the Comtac intercom headset, headset will be separated out from the arc-shaped headband, directly clip to the buckle.
- Hang buckle can be fixed to the helmet on the 2 sides of the helmet rails, after installation, the Comtac headphones headset can rotate freely. Rotating design allows headset to swing up and out of the way when not in use
LIVIQILY Helmet Accessory Improved Version PVS-14 /PVS-18 Single-Barrel Night Vision Model Metal Dumper（Night Vision Goggle NOT Included）
- Glide-Rite Infinitely Adjustable in both vertical and horizontal directions(Night Vision Goggle NOT Included).
- New and improved version is more convenient and faster, suitable for a variety of models.
- Helmet Mount Release Button allows quick one-handed release from Helmet Bracket or Shroud.
- Force-to-Overcome Deploy/Stow Release enables single-handed decisive user pressure flip-up/flip-down.
- Ergonomically Optimized Vertical, Tilt, and Fore/Aft-Eye-Relief Adjustment Levers for a custom-fit user experience.
ATAIRSOFT Tactical Helmet Headset Adapter for COMTAC Headset Fast Helmet Side Rail (TAN)
- ★ 100% brand new. Weight: 120g
- ★ Made by high quality nylon plastic material, Connect the Fast Helmet Side Rail and ZTAC COMTAC series headphones firmly. It can be easily installed in the Fast helmet side rail.
- ★ Package including: 1 pair of Rail Adapter Headset Holder Set, 1 pair of 20mm rails, 1 Installation Fittings. Available in 4 colors: Black / DE / FG / OD green
- ★ Only suitable for FAST helmet rails and ZTAC COMTAC series headset.
- ★ The 2pcs 20mm rails are used to connect flashlight or laser pointer.
WISHRING Z Tactical Miltary Heavy Duty Bowman EVO III Headset Earpiece War Game Airsoft
- Military style jack plug.
- Compatible with PTT units (not included)
- Clear sound, strong and durable.
- Mic can be worn on left or right
OPSMEN Tactical Earmor M32H Electronic Headphones for FAST Helmets (Black)